Comminuting-disintegrating machine 26
Configeration
| Comminuting- disintegrating machine «Udarnik 26» | 1 |
Characteristics
| Unloading crushed material | Снизу |
| Overall dimensions assembled (L*W*H) | 1544*1702*3377 mm |
| Overall dimensions of the Grinder (L*W*H) | 1208*947*890 mm |
| Loading source material | Сверху |
| Finger-beat linear speed | 72 pc |
| Finger-beat linear speed | 64 m/s |
| Maximum initial particle size | 15 mm |
| Weight | 420 kg |
| Engine power on a large disk | 15 kw |
| Engine power on a small disk | 11 kw |
| Disk rotation direction | На встречу |
| Performance | До 4 t/h |
| Disk speed | 3000 rpm |
Comminuting- disintegrating machine «Udarnik 26»
«Udarnik 26» is equipped with two electrical engines, the capacity is 11 and 15 kW and is intended for comminuting a wide range of bulk materials of various origin with hardness index to 7 units by Moos on-scale. The biggest original fraction is under 12 mm and the material moisture is under 6%. The disintegrator mode is an intermittent rating of short duration. After an hour of continuous operation, the disintegrator needs to stop and start again only in an hour.
Loading hopper with butterfly valve
Заполняется сыпучим материалом, после открытия заслонки сырье попадает в зону измельчения.
Receiving silo with the slide gate
The feedstock from the disintegrator goes to the receiving silo and then into the unloading mixing screw.
Kit of disks with fingers for the Disintegrator
Disintegration is based on the free-kick principle. Both disks are rotating in contrary directions and have kicking items on their surfaces which resemble fingers, arranged in 2-4 rows like a circle. The disks are opposing each other so that the fingers of one disk fit the spaces between the fingers of the second disk.
Frame for the disintegrator
It is a supporting structure to install the comminuting-disintegrating machine.
Description
«Udarnik 26» is equipped with two electrical engines, the capacity is 11 and 15 kW and is intended for comminuting a wide range of bulk materials of various origin with hardness index to 7 units by Moos on-scale. The biggest original fraction is under 12 mm and the material moisture is under 6%. The disintegrator mode is an intermittent rating of short duration. After an hour of continuous operation, the disintegrator needs to stop and start again only in an hour.
